| Formula | polymer-bonded |
|---|---|
| Relative strength | Very low |
| Max operating temperature | typically below 80 °C |
| Relative cost | Low |
| Corrosion resistance | Good |
Formability is the whole point
Sheet, strip and moulded shapes, cut to size on site. Signage, gaskets, fridge seals and light retention. Nobody chooses it for holding force.
Bonded rare-earth is a different thing
Neodymium powder in a binder gets closer to real strength while keeping complex shapes, at a price between the two. Ask specifically if a moulded part needs more force than flexible sheet can give.
These figures are the ranges the trade works to and they move with grade,
geometry and manufacturer. For anything load-bearing or safety-related, work from the
datasheet for the exact part.
Ask us whether this suits the job
Compare all five materials → · Browse by what the magnet does →